Jaw Crusher Hire in Perth
Tracked and static jaw crushers for dry hire across Perth and WA — primary crushers for quarry rock, concrete and demolition recycling, listed directly by the owners who run them.
Jaw crushers available in Perth
Serving quarries, recyclers and civil contractors across the Perth metro area, from the northern corridor and Wangara through to Kwinana, Rockingham and the Peel region.
Loading current listings…
Jaw crushers on Ultihire
A jaw crusher is the primary machine on almost every crushing job: it takes blasted rock, oversize or demolition concrete and reduces it to a size the rest of the plant can handle. On Ultihire you will find tracked mobile jaws in the 30 to 55 tonne class from the major brands, and occasionally smaller compact units suited to a single-machine recycling job.
What to compare between listings: jaw opening (a 1000 x 650 mm jaw handles very different feed from a 1200 x 750), closed side setting range, whether it has a hydraulic release or overload system, pre-screen and bypass chute arrangement, and whether it is set up for concrete with rebar (magnet fitted, dirt belt).
Sizing a jaw for your job
Match the feed. The largest lump should be no more than about 80% of the jaw opening, or the machine will bridge and you will spend the day rock-breaking. Match the throughput too: a 1000-class jaw closed down to 100 mm will not give you 300 tonnes an hour, no matter what the brochure says. If you are unsure, tell the owner what you are feeding and what you need out — most have run their machine on similar material and will give you a straight answer.
For concrete recycling a jaw on its own is often enough, producing a roadbase that goes straight over a screen. For hard quarry rock you will usually want a cone or impactor behind it — see the other machine types below.
Before you accept a hire
Ask about the jaw dies. Manganese is the biggest consumable on a jaw and a set that is close to its flip or replacement point will eat into your production. Ask what toggle plate is fitted, when the bearings were last checked, and whether the owner supplies a commissioning day. Confirm transport: a tracked jaw needs a float and, above certain dimensions, an oversize permit and pilot in WA.
Crushing & screening hire in Perth
Perth has one of the busiest crushing and screening markets in the country for its size. Limestone quarries along the coastal plain, hard-rock operations in the Darling Scarp, a steady stream of demolition concrete from the metro area and a civil program that never seems to stop all need mobile plant, and much of it sits idle between jobs. That is what Ultihire is built to fix.
Because listings show suburb and delivery radius, you can find plant that is already on your side of the river and avoid a float from the other side of the metro. Owners in the northern suburbs, the eastern industrial belt around Hazelmere and Forrestfield, and the south around Kwinana and Rockingham list here.
Frequently asked questions
What size jaw crusher do I need?
Work back from your feed size and the product you need. As a rule of thumb the biggest lump should fit comfortably inside 80% of the jaw opening. Tell the owner your feed material and target output and they will tell you whether their machine suits.
Can I hire a jaw crusher for concrete recycling?
Yes, and it is one of the most common uses. Ask whether the machine has an overband magnet fitted and whether the owner allows rebar-heavy feed, because some do not.
Do I need an operator?
For a dry hire, yes — you supply the operator and the daily pre-start. Some owners offer an operator or a set-up day; the listing will say.
How is the machine delivered?
On a float. Owners either quote delivery on the listing or leave transport to you. A 40-tonne tracked jaw is an oversize load in WA, so allow for permits and a pilot vehicle in your planning.
Tell us what the job needs
Not sure which machine suits? Describe the material and the tonnage and we will come back with what fits and what it costs. No account needed.
Enquire about hire
We will come back to you with availability, a daily rate and what transport to site looks like.
More crushing & screening hire
Other machines and regions across Western Australia.
Got a crusher or screen sitting idle?
Listing is free. Set your rate, minimum hire and bond, accept only the requests you want, and keep the hire agreement between you and the renter.